Concrete Sealers

WB15

WB15 Water-Based Low Gloss Wet Look Acrylic Cure And Seal For New Concrete

Water-Based Low Gloss Wet Look Acrylic Cure And Seal For New Concrete


The Armor WB15 is a water-based low gloss acrylic cure and seal designed to enhance, seal, and protect concrete and concrete paver surfaces. The durable low gloss finish left behind by the Armor WB15 will instantly enhance any dull and faded surfaces. The Armor WB15 also doubles as a cure and seal and helps to aid in the curing process of new concrete surfaces.

Benefits:

  • Can be used on new, uncured concrete to help aid with proper curing

  • Meets ASTM C309 standards

  • Will enhance dull and faded surfaces with a low gloss finish

  • Will reduce damage and deterioration caused by water absorption and surface abrasion

  • Will reduce the growth of mold, mildew, and algae

  • UV resistant, non-yellowing, breathable


    Technical Data Sheet & Application Instructions
    | Material Safety Data Sheet

WB15 Water-Based Low Gloss Wet Look Acrylic Cure And Seal For New Concrete
WB15 Water-Based Low Gloss Wet Look Acrylic Cure And Seal For New Concrete
  • The Armor WB15 is a great choice for a variety of interior and exterior concrete applications, including:

    • Pool decks and patios

    • Driveways, walkways, and stairs

    • Retail and shop floors

    • Much more!

    The WB15 can be applied to a variety of interior and exterior concrete surfaces, including:

    • Stamped concrete

    • Poured and broom finished concrete

    • Exposed aggregate concrete

    • Concrete pavers

    • New, uncured concrete

    The Armor WB15 is designed specifically to be used on unsealed concrete and concrete pavers. It can also be applied to concrete and concrete paver surfaces previously sealed with a water based acrylic as long as the acrylic has been properly prepped for adhesion. The Armor WB15 should not be used to seal clay brick, red Chicago pavers, flagstone, slate, smooth concrete, or natural stone. If you are looking to seal clay brick, red Chicago pavers, flagstone, slate, or natural stone, consider instead of the Armor WL550 or the Armor SX5000 WB.

    The Armor WB15 can’t be applied over any other film forming sealer, other than a water-based acrylic sealer. It can’t be applied over a water based acrylic, an acrylic latex, a paint, epoxy, or urethane.

  • When applied in clear, the Armor WB15 will provide a transparent low gloss finish.

    The actual level of gloss and enhancement received will depend on the type and age of the surface, age, porosity, condition, applicator, application method, and amount of material applied. For an accurate representation of what your surface will look like once sealed, we suggest applying the product to a test area first.

  • When properly applied, the Armor WB15 can provide up to 1-3 years of life on an exterior surface before the need to recoat, and up to 2-7 years of life on an interior surface.

    While the Armor WB15 is designed to out-last and out-perform similar products on the market, there are several factors that can impact actual product life including the severity of surface abrasion and level of foot traffic, the porosity of the concrete or pavers, and the amount of resin build-up on the surface. Some surfaces need to be sealed every year, while others can go a few years without sealing.