Concrete Sealers

WB25

WB25 Water-Based High Gloss Wet Look Acrylic Cure And Seal For New Concrete

Water-Based High Gloss Wet Look Acrylic Cure And Seal For New Concrete


The Armor WB25 is a water-based high gloss acrylic cure and seal designed to enhance, seal, and protect concrete and concrete paver surfaces. The durable high gloss finish left behind by the Armor WB25 will instantly enhance any dull and faded surfaces. The Armor WB25 also doubles as a cure and seal and helps to aid in the curing process of new concrete surfaces.

Benefits:

  • Can be used on new, uncured concrete to help aid with proper curing

  • Meets ASTM C1315 and ASTM C309 standards

  • Will enhance dull and faded surfaces with a high gloss finish

  • Will reduce damage and deterioration caused by water absorption and surface abrasion

  • Will reduce the growth of mold, mildew, and algae

  • UV resistant, non-yellowing, breathable

    Technical Data Sheet & Application Instructions | Material Safety Data Sheet

WB25 Water-Based High Gloss Wet Look Acrylic Cure And Seal For New Concrete
WB25 Water-Based High Gloss Wet Look Acrylic Cure And Seal For New Concrete
  • The Armor WB25 is a great choice for a variety of interior and exterior concrete applications, including:

    • Pool decks and patios

    • Driveways, walkways, and stairs

    • Retail and shop floors

    • Much more!

    The WB25 can be applied to a variety of interior and exterior concrete surfaces, including:

    • Stamped concrete

    • Poured and broom finished concrete

    • Exposed aggregate concrete

    • Concrete pavers

    • New, uncured concrete

    The Armor WB25 is designed specifically to be used on unsealed concrete and concrete pavers. It can also be applied to concrete and concrete paver surfaces previously sealed with a water based acrylic as long as the acrylic has been properly prepped for adhesion. The Armor WB25 should not be used to seal clay brick, red Chicago pavers, flagstone, slate, smooth concrete, or natural stone. If you are looking to seal clay brick, red Chicago pavers, flagstone, slate, or natural stone, consider instead of the Armor WL550 or the Armor SX5000 WB.

    The Armor WB25 can’t be applied over any other film forming sealer, other than a water-based acrylic sealer. It can’t be applied over a water based acrylic, an acrylic latex, a paint, epoxy, or urethane.

  • When applied in clear, the Armor WB25 will provide a transparent high gloss finish.

    The actual level of gloss and enhancement received will depend on the type and age of the surface, age, porosity, condition, applicator, application method, and amount of material applied. For an accurate representation of what your surface will look like once sealed, we suggest applying the product to a test area first.

  • When properly applied, the Armor WB25 can provide up to 1-3 years of life on an exterior surface before the need to recoat, and up to 2-7 years of life on an interior surface.

    While the Armor WB25 is designed to out-last and out-perform similar products on the market, there are several factors that can impact actual product life including the severity of surface abrasion and level of foot traffic, the porosity of the concrete or pavers, and the amount of resin build-up on the surface. Some surfaces need to be sealed every year, while others can go a few years without sealing.