Concrete Sealers

SX5000 WB

SX5000 WB Penetrating Water-Based Silane Siloxane Concrete Sealer

Penetrating Water-Based Silane Siloxane Concrete Sealer And Masonry Water Repellent


The Armor SX5000 WB is a Department of Transportation approved water based Silane-Siloxane water repellent sealer for unsealed concrete, brick, stone and masonry.

  • Won’t change the look, color, or texture of the surface

  • Works entirely below the surface and won’t leave a surface film

  • Reduces surface water absorption by up to 95%

  • Reduces damage and deterioration caused by water absorption

  • Reduces damage and deterioration caused by snow, ice, and de-icing salts

  • Reduces the growth of mold, mildew, and algae


    Technical Data Sheet | Safety Data Sheet

SX5000 WB Penetrating Water-Based Silane Siloxane Concrete Sealer
SX5000 WB Penetrating Water-Based Silane Siloxane Concrete Sealer
  • The Armor SX5000 WB is designed specifically to be used on unsealed concrete, brick, natural stone, and masonry. The Armor SX5000 WB can’t be applied over any existing sealers, paints, or coatings.

    The Armor SX5000 WB is a fantastic sealer for a variety of applications, including:

    • Brick chimneys and brick walls

    • Concrete, brick, natural stone, and paver patios and walkways

    • Concrete, brick, and paver driveways

    • Retaining walls and landscape curbing

    • Concrete, brick, and stone building faces and accents

    • Garage, basement, and warehouse floors

    • Much more!

  • The Armor SX5000 WB is designed to work entirely below the surface. It chemically reacts to form a hydrophobic barrier in the pores. It will not change the look or color of the substrate, and it will not leave a visible surface film.

    If you are looking for a wet look, low gloss, or high gloss, consider instead the Armor WL550 for a matte wet look, the Armor AR350 for a low gloss wet look, or the Armor AR500 for a high gloss wet look.

  • When properly applied, the Armor SX5000 WB can provide up to 7-10 years of life on an exterior surface before the need to recoat.

    Water Bead: Surface water beading will not occur on all surfaces. While some surfaces may experience an instantaneous bead, others won’t experience a surface water bead at all. Surface water beading is not a sealer benefit. Surface water bead is caused from resin build-up on the surface. Once the resin build-up goes away, so will the bead. The Armor SX5000 WB is designed to work entirely below the surface so its benefits are made visible through performance. You will find sealed surfaces dry faster, are easier to clean, and experience less damage caused by freeze-thaw cycles and de-icing salts.