Concrete Sealers
LV15
Water Based Lithium Silicate Concrete Densifier and Surface Hardener for Unsealed Concrete Surfaces.
The Armor LV15 is a solvent-based low gloss acrylic cure and seal designed to enhance, seal, and protect concrete and concrete paver surfaces. It will darken the surface to enhance any dull and faded coloring, and protect the surface with a durable low gloss surface film.
Benefits:
Can be used on new, uncured concrete to help aid with proper curing
Meets ASTM C309 standards
Will enhance dull and faded surfaces with a low gloss wet look
Will reduce damage and deterioration caused by water absorption and surface abrasion
Will reduce the growth of mold, mildew, and algae
-
The Armor LV15 can be used in a variety of applications, including:
Concrete and paver patios
Driveways, walkways, and stairs
Salt water and fresh water pool decks
Car ports and pole barns
Much more!
The Armor LV15 is great for use on:
Stamped concrete
Poured and broom finished concrete
Exposed aggregate concrete
Concrete pavers
New, uncured concrete
The Armor LV15 is designed specifically to be used on unsealed concrete and concrete pavers. It can also be applied to concrete and concrete paver surfaces previously sealed with a solvent based acrylic. The Armor LV15 should not be used to seal clay brick, red Chicago pavers, flagstone, slate, or natural stone. If you are looking to seal clay brick, red Chicago pavers, flagstone, slate, or natural stone, consider instead of the Armor WL550 or the Armor SX5000 WB.
The Armor LV15 can’t be applied over any other film forming sealer, other than a solvent-based acrylic sealer. It can’t be applied over a water based acrylic, an acrylic latex, a paint, epoxy, or urethane.
-
The Armor LV15 ships in clear and offers a low gloss finish. Armor Opaque Acrylic Color Packs can be added for a tinted opaque low gloss finish, and Armor Semi-Transparent Acrylic Color Packs can be added for a tinted semi-transparent low gloss finish.
The actual level of gloss and enhancement received will depend on the type and age of the surface, porosity, condition, applicator, application method, and amount of material applied. For an accurate representation of what your surface will look like once sealed, we suggest applying the product to a test area first.
-
When properly applied, the Armor LV15 can provide up to 1-3 years of life on an exterior surface before the need to recoat.
While the Armor LV15 is designed to out-last and out-perform similar products on the market, there are several factors that can impact actual product life including the severity of surface abrasion and level of foot traffic, the porosity of the concrete or pavers, and the amount of resin build-up on the surface. Some surfaces need to be sealed every year, while others can go a few years without sealing.